BD Power Cool Down Timer Kit V2.0 (07-14 6.6L Duramax Sierra 2500 HD)Find parts that fit my vehicle

Description. Turbochargers operate at high temperatures. The Cool Down Timer is designed to keep the engine running when the ignition is turned off to prevent turbocharger bearing failure that could occur when the engine is shut down, stopping the cool lubricating oil flowing to the turbocharger while it is still hot. If the oil flow is shut off too early, the remaining oil in the bearing housing will overheat causing coking of the bearings which causes both premature bearing wear and reduced oiling of the bearings. Allowing the engine to idle to a minimum operating speed gives the turbocharger time to cool down. The CDT is adjustable for up to 5 minutes of idle time, or optionally works with any K-Type EGT probe for temperature-based shutdown.

• Prevent turbo damage during hot engine shutdown
• EGT, time and manual controlled shutdown
• Works with any K-Type EGT probe
• Compatible with most OEM vehicle security alarms
• Install Time 3 Hours

Emissions. This product does not require an EO in California. By nature of its design, it is legal for sale and use in all 50 states. Replacement parts included. (EMS:4)

Fitment:

• 2007 GMC Sierra 2500
• 2008 GMC Sierra 2500
• 2009 GMC Sierra 2500
• 2010 GMC Sierra 2500
• 2011 GMC Sierra 2500
• 2012 GMC Sierra 2500
• 2013 GMC Sierra 2500
• 2014 GMC Sierra 2500

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov